Tru-Tech Industries

	Tru-Flow:	ANSI (Short) Face-to-Face to Directly Replace Plug, Ball, and Gate Valves.
	Maxi-Flow:	MSS (Long) Face-to-Face to Directly Replace most Brands of Diaphragm Valves.

III.

HEAVY DUTY PNEUMATIC ACTUATORS: Designed specifically to open, close or modulate valves. They provide users with precision control, low operating cost and exceptionally long life.

*Note: All valves and accuators manufactured by TTI are built and tested to all applicable standards in our modern facility in Mars, Pennsylvania.

This actuator/accessory package is designed to normally position the valve open. The valve will close when compressed air is admitted into the upper actuator chamber and the actuator spring will open the valve when the air is exhausted.

This actuator/accessory package is designed to open the valve when compressed air is admitted into the lower chamber and closes the valve when compressed air is admitted into the upper chamber.

This actuator/accessory package is provided with a positioner to accurately throttle the valve for pressure, liquid level, flow, temperature, and other control requirements. A transducer is generally supplied to provide valve modulation proportional to an electric signal (most often 4-20 ma).

This actuator/accessory package is designed to normally position the valve closed. The valve will open when compressed air is admitted into the lower actuator chamber and the actuator spring will close the valve when the air is exhausted.